diff --git a/main/esp32-sequencer.c b/main/esp32-sequencer.c
index 4e8c0e5..c6a445f 100644
--- a/main/esp32-sequencer.c
+++ b/main/esp32-sequencer.c
@@ -115,7 +115,7 @@ static void update_seq(uint8_t *sequence) {
   for (uint8_t i = 0; i < seq_len; i++) {
     if (sequence[i] == 1) {
       seq_str[i] = 'x';
-      } else {
+    } else {
       seq_str[i] = 'o';
     }
   }
@@ -181,8 +181,7 @@ static void control_event_handler(void* arg) {
     uint8_t current_state = gpio_get_level(gpio_num);
     if (xQueueReceive(control_event_queue, &gpio_num, portMAX_DELAY)) {
       /* Check if interrupt triggered stays the same for long enough */
-      if ((current_state == last_btn_state) &&
-          (xTaskGetTickCount() - last_debounce_time > DEBOUNCE_TIMEOUT)) {
+      if ((current_state == last_btn_state) && (xTaskGetTickCount() - last_debounce_time > DEBOUNCE_TIMEOUT)) {
         ESP_LOGI(TAG, "Handling control from GPIO %" PRIu32, gpio_num);
         switch (gpio_num) {
         case GPIO_MUTATE_BTN:
@@ -261,7 +260,9 @@ static void gpio_init(void) {
   ESP_ERROR_CHECK(gptimer_set_alarm_action(gate_timer, &cv_off_alarm_config));
 
    /* Register gate timer callback */
-  gptimer_event_callbacks_t clk_cbs = {.on_alarm = gate_off_alarm_cb};
+  gptimer_event_callbacks_t clk_cbs = {
+    .on_alarm = gate_off_alarm_cb
+  };
   ESP_ERROR_CHECK(gptimer_register_event_callbacks(gate_timer, &clk_cbs, NULL));
   ESP_ERROR_CHECK(gptimer_enable(gate_timer));
 }
@@ -386,10 +387,8 @@ static void display_init(void) {
   lv_init();
 
   /* Allocate draw buffers */
-  lv_color_t *buf1 =
-      heap_caps_malloc(LCD_H_RES * 80 * sizeof(lv_color_t), MALLOC_CAP_DMA);
-  lv_color_t *buf2 =
-      heap_caps_malloc(LCD_H_RES * 80 * sizeof(lv_color_t), MALLOC_CAP_DMA);
+  lv_color_t *buf1 = heap_caps_malloc(LCD_H_RES * 80 * sizeof(lv_color_t), MALLOC_CAP_DMA);
+  lv_color_t *buf2 = heap_caps_malloc(LCD_H_RES * 80 * sizeof(lv_color_t), MALLOC_CAP_DMA);
   /* Initialize draw buffers */
   static lv_disp_draw_buf_t disp_buf;
   lv_disp_draw_buf_init(&disp_buf, buf1, buf2, LCD_H_RES * 80);
@@ -484,6 +483,7 @@ void app_main(void) {
   /* Initialize GPIO */
   gpio_init();
   controls_init();
+
   /* Initialize LCD */
   display_init();
   gui_create();